|Cycle progresses||Automatically by control system through condition 、sterilizing、exhaust、drying and venting phases.|
|Sterilize temperature:||There are two temperature for selection 121℃/132℃|
|Sterilize Time||adjustable from 0~30 minutes on sterilizing timer and drying time.|
|Drying Time||adjustable form 0~40 minutes on drying timer.|
|The timer starts only after the pre-set temperature is reached, ensuring complete sterilization.|
|Buzzer announces||the completion and cuts off the heating power source.|
|Press-Temperature Gauge||make ideal require reading and indicate high precision and consistent results.|
|Integral Heating system||is equipped with a high efficient immersion heater|
|Temperature Switch||to provide strict control of heating temperature.|
|Pre-Heating device||to pre-heat the chamber before operation and ensures efficient heating and drying functions.|
|Automatic Air Venting device||discharges cool air from chamber to obtain effective saturated steam.|
|Large water reservoir||supply water consumption of several sterilizing cycle.|
|Chamber Door:||is manually operated and actuated by rotating a door handle.|
|Chamber type:||Cylindrical chamber, construction is thermally insulated with foil backed fiberglass insulation.|
|Safety devices:||1. Cycle does not start unless chamber is locked. |
2.Safety valve releasing steam in case of excessive chamber pressure.
3.High temperature deviation in chamber actuates audible alarm and protective device cuts off the heating source immediately.
4.Fuse protects control units when short circuit or overload occurs.
5.Emergency manual exhaust to vent the chamber and remove the load in the event of a power outage.
|Chamber size:||∅23x D39cm|
|Design Temperature||138 ℃|
|Working Temperature||121/132 ℃|
|Electric Powr||110V-2kw. 220V-2.75kw.|
|Chamber Material||Stainless Steel SUS304|
|Shell Material||Steel Processed with Electrostatic Painting|
|Accessories||1.Bottom Tray x 1pc. 2.Sterilizing Container x 1pc. |